Part No. : 37941-7 | Alternate P/N : 379417 | Manufacturer : joint oil analysis program |
Item Name: bushing sleeve | NSN: 3120-01-303-2881 (3120013032881) | CAGE Code: 07RP9 |
FSC: 3120 Bearings Plain Unmounted |
If you require part number 37941-7 from Joint Oil Analysis Program which is described as a Bushing Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 37941-7 which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120013032881 and was produced under the CAGE Code 07RP9. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 37941-7 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 37941-7
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3120-01-303-2881 Item Description: Bushing Sleeve | 3120 | 013032881 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
37941-7 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 0.5400 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM |
ADAR | BODY OUTSIDE DIAMETER | 0.7505 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
AEPR | FLANGE OUTSIDE DIAMETER | 1.1900 INCHES NOMINAL |
AGFF | FLANGE WIDTH | 0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
BZLX | CORNER SHAPE | CHAMFERED INSIDE LEFT CORNER |
BZLX | CORNER SHAPE | CHAMFERED OUTSIDE LEFT CORNER |
BZLX | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER |
BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
BZLX | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER |
CSYM | SURFACE FINISH | 100.0 MICROINCHES OVERALL |
MATT | MATERIAL | STEEL COMP 4130 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END |
ADAS | BODY INSIDE DIAMETER | 0.5290 INCHES MINIMUM AND 0.5310 INCHES MAXIMUM |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload