Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 107TAR32-40-14 | Alternate P/N : 107TAR324014 | Manufacturer : k and t machine mfg co |
| Item Name: bearing ball duplex | NSN: 3110-01-267-3017 (3110012673017) | CAGE Code: 40720 |
If you require part number 107TAR32-40-14 from K And T Machine Mfg Co which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 107TAR32-40-14 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110012673017 and was produced under the CAGE Code 40720. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 107TAR32-40-14 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-267-3017 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 012673017 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4610567-2 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.4500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.0000 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.5000 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYC | CALIBRATION DESIGNATOR | C |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | 10.0 POUNDS MINIMUM AND 20.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATION WITH SPECIFIED LUBRICANT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | HMS 20-2164,TYPE I,CLASS 2,CAGEC 82577 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COPPER ALLOY 172 BALL OR COPPER ALLOY 173 BALL |
| MATT | MATERIAL | COPPER ALLOY 172 INNER RING OR COPPER ALLOY 173 INNER RING |
| MATT | MATERIAL | COPPER ALLOY 172 OUTER RING OR COPPER ALLOY 173 OUTER RING |
| MATT | MATERIAL | COTTON RETAINER AND PLASTIC PHENOLIC RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC ALL MATERIAL RESPONSES RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC ALL MATERIAL RESPONSES BALL OR ASTM B196 ASSN STD ALL MATERIAL RESPONSES BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC ALL MATERIAL RESPONSES INNER RING OR ASTM B196 ASSN STD ALL MATERIAL RESPONSES INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC ALL MATERIAL RESPONSES OUTER RING OR ASTM B196 ASSN STD ALL MATERIAL RESPONSES OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions