Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : G121-706-616 | Alternate P/N : G121706616 | Manufacturer : kearfott corporation |
| Item Name: resistor variable wire wound non | NSN: 5905-00-244-8354 (5905002448354) | CAGE Code: 88818 |
If you require part number G121-706-616 from Kearfott Corporation which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number G121-706-616 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905002448354 and was produced under the CAGE Code 88818. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part G121-706-616 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-244-8354 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 002448354 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G121-706 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.637 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.100 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions