Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 1103D | Manufacturer : kendick mfg co | Item Name: resistor variable wire wound pre |
| NSN: 5905-00-836-6006 (5905008366006) | CAGE Code: 10105 | FSC: 5905 Resistors |
If you require part number 1103D from Kendick Mfg Co which is described as a Resistor Variable Wire Wound Pre component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1103D which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905008366006 and was produced under the CAGE Code 10105. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1103D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-836-6006 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008366006 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1101V31 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.781 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0580 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.281 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 353.0 NOMINAL |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS 1ST SECTION AND 5.000 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.015 TO 0.015 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 HEAT SINK ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.0295 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9975 INCHES MINIMUM AND 1.0025 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.562 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0880 INCHES MINIMUM AND 1.0930 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0560 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFK | MAXIMUM STARTING TORQUE | 0.125 INCH-OUNCES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -650.0 TO 650.0 1ST SECTION AND-950.0 TO 950.0 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 7.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions