Part No. : C3156C25 | Manufacturer : kevlin corporation | Item Name: bearing ball duplex |
NSN: 3110-01-199-9493 (3110011999493) | CAGE Code: 25634 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number C3156C25 from Kevlin Corporation which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number C3156C25 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110011999493 and was produced under the CAGE Code 25634. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part C3156C25 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. C3156C25
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-199-9493 Item Description: Bearing Ball Duplex | 3110 | 011999493 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
C3156c25 | 5 | 1 | C | 9 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.6250 INCHES NOMINAL |
ABXV | BORE DIAMETER | 3.5000 INCHES NOMINAL |
ADGA | OVERALL OUTSIDE DIAMETER | 4.1250 INCHES NOMINAL |
ADZG | LUBRICATION MATERIAL | GREASE |
AGAV | END ITEM IDENTIFICATION | AIR ROUTE SURVEILLANCE RADAR 3,ARSR3 |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | PRESSED |
AGYK | SHIELD QUANTITY | 2 |
AGZC | LOAD DIRECTION | ANGULAR |
AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-27617 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL COMP 440C OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD66 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload