Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 53131 | Manufacturer : kleinschmidt inc | Item Name: pin grooved headed |
| NSN: 5315-00-209-7594 (5315002097594) | CAGE Code: 82423 |
If you require part number 53131 from Kleinschmidt Inc which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 53131 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315002097594 and was produced under the CAGE Code 82423. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 53131 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-209-7594 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 002097594 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 53131 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT |
| ABMZ | DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.222 INCHES MINIMUM AND 0.232 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 0.744 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.020 INCHES NOMINAL |
| ABPF | SECOND UNDERCUT DIAMETER | 0.178 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | CASEHARDENED |
| CRMG | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| CRRG | PIN HEAD DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES ALL OTHER SURFACES |
| HGTH | HEIGHT | 0.016 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1018 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR PHOSPHATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD 1ST TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions