Part No. : 531AS104-1 | Alternate P/N : 531AS1041 | Manufacturer : klune industries inc |
Item Name: spring helical torsion | NSN: 5360-00-019-6857 (5360000196857) | CAGE Code: 05DN8 |
FSC: 5360 Coil Flat Leaf and Wire Springs |
If you require part number 531AS104-1 from Klune Industries Inc which is described as a Spring Helical Torsion component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 531AS104-1 which is listed under the Federal Supply Class 5360 Coil Flat Leaf and Wire Springs. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5360000196857 and was produced under the CAGE Code 05DN8. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 531AS104-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 531AS104-1
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5360-00-019-6857 Item Description: Spring Helical Torsion | 5360 | 000196857 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
531as104-1 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AARX | INSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
ABQK | END STYLE | OFFSET HALF LOOP, LEFT END SECOND END |
ABQK | END STYLE | REDUCED LOOP END FIRST END |
AGEK | SPRING FREE LENGTH | 0.812 INCHES NOMINAL |
AHQA | CENTER SECTION WIDTH | 0.562 INCHES NOMINAL |
APCN | COIL QUANTITY | 2-1/2 |
AXLQ | SPRING FREE OUTSIDE DIAMETER | 1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
AXLY | CENTER LOOP RADIUS | 0.156 INCHES NOMINAL |
AXMC | HOOK RADIUS | 0.250 INCHES NOMINAL BOTH ENDS |
AXMC | HOOK RADIUS | 0.281 INCHES NOMINAL FIRST END |
AXMH | END ANGULAR RELATIONSHIP | END W/LH HELIX OF COIL ANGLED TO CENTER SECTION AND END W/RH HELIX OF COIL ANGLED TO CENTER SECTION |
CXTP | END LENGTH FROM SECOND BEND TO THIRD BEND OR END | 0.375 INCHES NOMINAL SECOND END |
CXTP | END LENGTH FROM SECOND BEND TO THIRD BEND OR END | 0.531 INCHES NOMINAL FIRST END |
STYL | STYLE DESIGNATOR | SINGLE TORSION RIGHT HAND |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload