Part No. : 200101 | Manufacturer : l 3 communications corporation | Item Name: nut plain slotted hexagon |
NSN: 5310-00-516-5058 (5310005165058) | CAGE Code: 02978 | FSC: 5310 Nuts and Washers |
If you require part number 200101 from L 3 Communications Corporation which is described as a Nut Plain Slotted Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 200101 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310005165058 and was produced under the CAGE Code 02978. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 200101 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 200101
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
ACTA | NUT STYLE | SLOTTED, HEXAGON |
ADEA | NUT HEIGHT | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
ASDB | WIDTH ACROSS FLATS | 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
BZRR | THREAD SERIES | UNF |
CMLP | THREAD QUANTITY PER INCH | 28 |
CQFM | HARDNESS RATING | 20.0 ROCKWELL C MINIMUM AND 26.0 ROCKWELL C MAXIMUM |
CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT AND 92.0 DEGREES MAXIMUM NUT |
CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
MATT | MATERIAL | STEEL COMP 1040 OVERALL OR STEEL COMP 1042 OVERALL OR STEEL COMP 1045 OVERALL OR STEEL COMP 1137 OVERALL OR STEEL COMP 1139 OVERALL OR STEEL COMP 1140 OVERALL OR STEEL COMP 1141 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR ASTM A576 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR HSTM A576 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OVERALL OR ASTM A576 ASSN STD 3RD MATERIAL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload