Part No. : A547-611 | Alternate P/N : A547611 | Manufacturer : l 3 communications corporation |
Item Name: pin shoulder headless | NSN: 5315-00-896-6735 (5315008966735) | CAGE Code: 34228 |
FSC: 5315 Nails Machine Keys and Pins |
If you require part number A547-611 from L 3 Communications Corporation which is described as a Pin Shoulder Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number A547-611 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315008966735 and was produced under the CAGE Code 34228. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part A547-611 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. A547-611
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-00-896-6735 Item Description: Pin Shoulder Headless | 5315 | 008966735 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
A547-611 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CHAMFERED |
AATR | SHANK LENGTH | 0.531 INCHES NOMINAL |
AAVH | SHOULDER DIAMETER | 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
AAZE | SHANK DIAMETER | 0.1873 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 2.187 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.228 INCHES MINIMUM AND 0.232 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
AMCS | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
CQTR | SECOND SHANK DIAMETER | 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
CRDY | FIRST END LOCATION | BOTH ENDS |
CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
CWAS | SECOND SHANK LENGTH | 1.500 INCHES NOMINAL |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STYL | STYLE DESIGNATOR | UNDERCUT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload