Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 12412743-01 | Alternate P/N : 1241274301 | Manufacturer : landoll corporation |
| Item Name: hose assembly nonmetallic | NSN: 4720-01-426-7040 (4720014267040) | CAGE Code: 65459 |
| FSC: 4720 Hose and Tubing Flexible |
If you require part number 12412743-01 from Landoll Corporation which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 12412743-01 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720014267040 and was produced under the CAGE Code 65459. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 12412743-01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-426-7040 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014267040 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F2420637-6-6-6-31.28 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 2B 2ND END |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| CQRB | Seat Angle | 37.0 DEGREES 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| CQCS | Layer Composition And Location | 2ND LAYER BRAIDED STEEL WIRE |
| CRWL | Inside Surface Condition | SMOOTH |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| AKUU | End Connection Design | ELBOW 2ND END |
| AAJD | Thread Class | 2B 1ST END |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| CQGM | Maximum Operating Pressure | 3000.0 POUNDS PER SQUARE INCH |
| THSD | Thread Series Designator | UNJF 2ND END |
| THSD | Thread Series Designator | UNJF 1ST END |
| CRJM | Outer Covering Environmental Protection | OZONE RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRDW | Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 31.280 INCHES NOMINAL OVERALL |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AGAV | End Item Identification | 2320-01-354-4528; AN/AVR-2, LASER DETECITNG SET |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| CQBD | Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH |
| CQJX | Nominal Thread Size | 0.562 INCHES 2ND END |
| ABKV | Outside Diameter | 0.840 INCHES NOMINAL |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX | Inside Diameter | 0.375 INCHES NOMINAL |
| ACKH | Minimum Inside Bending Radius | 5.000 INCHES |
| AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
| CQJX | Nominal Thread Size | 0.562 INCHES 1ST END |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AHNC | Connection Style | SWIVEL NUT FLARE 2ND END |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE |
| ABJH | Temp Rating | -50.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MRC | Decoded Requirement | Clear Text Reply |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions