Part No. : NAS1152E4 | Manufacturer : lawrence engineering and supply inc | Item Name: screw close tolerance |
NSN: 5305-00-828-4612 (5305008284612) | CAGE Code: 04348 | FSC: 5305 Screws |
If you require part number NAS1152E4 from Lawrence Engineering And Supply Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1152E4 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305008284612 and was produced under the CAGE Code 04348. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1152E4 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1152E4
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-828-4612 Item Description: Screw Close Tolerance | 5305 | 008284612 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nas1152e4 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJC |
ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1152 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
MATT | MATERIAL | IRON ALLOY 660 OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload