Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 455176 | Manufacturer : liberty fastener company | Item Name: screw assembled washer |
| NSN: 5305-01-225-2106 (5305012252106) | CAGE Code: 6U503 |
If you require part number 455176 from Liberty Fastener Company which is described as a Screw Assembled Washer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 455176 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012252106 and was produced under the CAGE Code 6U503. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 455176 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-225-2106 Item PartTypeName: SCREW,ASSEMBLED WASHER | 5305 | 012252106 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 455176 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.667 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.750 INCHES NOMINAL |
| AASK | HEAD STYLE | PAN |
| AASL | HEAD DIAMETER | 0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| AAVW | WASHER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.216 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | 0.396 INCHES MINIMUM AND 0.408 INCHES MAXIMUM |
| CTHW | PRIMARY WASHER STYLE | FLAT INTERNAL TEETH |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | GM 275-M,FSCM 21450 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions