Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 7-951 | Alternate P/N : 7951 | Manufacturer : lift parts mfg co inc |
| Item Name: relay solenoid engine starter el | NSN: 2920-00-851-7743 (2920008517743) | CAGE Code: 16662 |
| FSC: 2920 Engine Electrical System Components Nonaircraft |
If you require part number 7-951 from Lift Parts Mfg Co Inc which is described as a Relay Solenoid Engine Starter El component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 7-951 which is listed under the Federal Supply Class 2920 Engine Electrical System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920008517743 and was produced under the CAGE Code 16662. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 7-951 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-851-7743 Item PartTypeName: RELAY-SOLENOID,ENGINE STARTER,EL | 2920 | 008517743 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 115540 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.315 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| AWYG | NOMINAL VOLTAGE RATING | 12.0 VOLTS |
| AXAZ | PULL-IN CURRENT | 26.0 AMPERES MINIMUM AND 29.0 AMPERES MAXIMUM |
| AXBA | HOLD-IN CURRENT | 18.0 AMPERES MINIMUM AND 20.0 AMPERES MAXIMUM |
| AXBE | ENGAGING LINKAGE | NOT INCLUDED |
| AXCD | CONTROL TERMINAL QUANTITY | 2 |
| AXCE | CONTROL TERMINAL TYPE | THREADED STUD |
| AXCF | GROUNDED CONTROL TERMINAL | NOT INCLUDED |
| AXHN | MOTOR DIAMETER FOR WHICH RIGID MOUNT IS DESIGNED | 5.040 INCHES MINIMUM AND 5.080 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 HOLE |
| SFTT | SURFACE TREATMENT | ZINC |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ARKQ | MOUNTING FACILITY SPACING | HOLES SPACED 1.400 IN. C TO C,66 DEG APART |
| AXHK | MAIN TERMINAL TYPE | THREADED STUD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions