Part No. : ST3M557-5-9 | Alternate P/N : ST3M55759 | Manufacturer : linread ltd |
Item Name: screw close tolerance | NSN: 5305-01-521-9174 (5305015219174) | CAGE Code: U6683 |
If you require part number ST3M557-5-9 from Linread Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ST3M557-5-9 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015219174 and was produced under the CAGE Code U6683. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ST3M557-5-9 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. ST3M557-5-9
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-521-9174 Item Description: Screw Close Tolerance | 5305 | 015219174 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
St3m557-5-9 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
CMLP | Thread Quantity Per Inch | 24 |
AASK | Head Style | FLAT COUNTERSUNK |
MRC | Decoded Requirement | Clear Text Reply |
ABQZ | Internal Drive Style | HIGH-TORQUE |
SFTT | Surface Treatment | PASSIVATE OVERALL |
AASB | Fastener Length | 1.078 INCHES MINIMUM AND 1.108 INCHES MAXIMUM |
ANEE | Grip Length | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
AASL | Head Diameter | 0.477 INCHES NOMINAL |
AGAV | End Item Identification | FWD FUSELAGE |
AASA | Thread Length | 0.531 INCHES NOMINAL |
MATT | Material | NICKEL ALLOY 718 OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
AHYM | Nominal Thread Diameter | 0.312 INCHES |
THSD | Thread Series Designator | UNJF |
AAUR | Grip Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
MDCL | Material Document And Classification | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AAJD | Thread Class | 3A |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload