Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1024D6D17-6A | Alternate P/N : TX1024D6D176A | Manufacturer : lisi aerospace canada corp |
| Item Name: screw close tolerance | NSN: 5305-01-477-1274 (5305014771274) | CAGE Code: L4528 |
| FSC: 5305 Screws |
If you require part number TX1024D6D17-6A from Lisi Aerospace Canada Corp which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1024D6D17-6A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014771274 and was produced under the CAGE Code L4528. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1024D6D17-6A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-477-1274 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 014771274 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1024D6D17-6A | 3 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ANEE | GRIP LENGTH | 1.613 INCHES MINIMUM AND 1.633 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH,INCONEL 718 (125 KSI SHEAR) |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASL | HEAD DIAMETER | 0.524 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 1.983 INCHES MINIMUM AND 2.013 INCHES MAXIMUM |
| AAUH | SPLINE MINOR DIAMETER | 0.1570 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.2195 INCHES MINIMUM AND 0.2225 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions