Part No. : HT4069-3-3A | Alternate P/N : HT406933A | Manufacturer : lisi aerospace |
Item Name: screw close tolerance | NSN: 5305-01-207-7550 (5305012077550) | CAGE Code: L4528 |
FSC: 5305 Screws |
If you require part number HT4069-3-3A from Lisi Aerospace which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HT4069-3-3A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012077550 and was produced under the CAGE Code L4528. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HT4069-3-3A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. HT4069-3-3A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-207-7550 Item Description: Screw Close Tolerance | 5305 | 012077550 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ht4069-3-3a | 5 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
AASK | HEAD STYLE | FILLISTER COUNTERSUNK |
AASL | HEAD DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.013 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 (E/F);AIRCRAFT, EAGLE F-15;AIRCRAFT, HARRIER AV-8B |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRSQ | COUNTERSINK ANGLE | 101.0 DEGREES NOMINAL |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23-118,INCO 718 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | ALUMINUM OVERALL AND CHROMATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488,TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload