Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 946921-4502 | Alternate P/N : 9469214502 | Manufacturer : litton systems inc |
| Item Name: resistor variable wire wound non | NSN: 5905-00-780-8689 (5905007808689) | CAGE Code: 13973 |
| FSC: 5905 Resistors |
If you require part number 946921-4502 from Litton Systems Inc which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 946921-4502 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905007808689 and was produced under the CAGE Code 13973. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 946921-4502 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-780-8689 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007808689 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2605666-139 | 1 | 1 | C |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | RECTANGULAR |
| ABHP | OVERALL LENGTH | 0.592 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| ABKW | OVERALL HEIGHT | 0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.419 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-27208-9 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLEC |
| AAPN | SECTION QUANTITY | 1 |
| ABMK | OVERALL WIDTH | 0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.080 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.420 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | TERMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions