Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 29-2408-514 | Alternate P/N : 292408514 | Manufacturer : lobo ventures ltd |
| Item Name: pin shear inboard s | NSN: 5315-00-670-1259 (5315006701259) | CAGE Code: 1HC54 |
| FSC: 5315 Nails Machine Keys and Pins |
If you require part number 29-2408-514 from Lobo Ventures Ltd which is described as a Pin Shear Inboard S component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 29-2408-514 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315006701259 and was produced under the CAGE Code 1HC54. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 29-2408-514 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-670-1259 Item PartTypeName: PIN,SHEAR,INBOARD S | 5315 | 006701259 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 29-2408-514 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | B-52 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHEAR PIN |
| FEAT | SPECIAL FEATURES | CRITICAL APPLICATION ITEM CAI) |
| SPCL | SPECIAL TEST FEATURES | REFER TO D2-3067 FOR MATERIAL PROCUREMENT MACHINING,HEAT TREAT AND INSPECTION REQUIREMENTS QUALITY CONTROLLED PART) AMS 6428 BAR |
| SUPP | SUPPLEMENTARY FEATURES | F-1.1914 ALL SURFACES EXCEPT AS NOTED ON DRAWING) |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | HEAT TREAT TO D2-3067 STRENGTH REQUIREMENTS PER BAC5617 MACHINING,GRINDING,AND HOLE PREPARATION SHALL BE PER BAC5440 MAGNETIC PARTICLE INSPECT PER BAC5424 CLASS A |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions