Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 85100 | Manufacturer : lockheed corp | Item Name: transformer pulse |
| NSN: 5950-00-860-0809 (5950008600809) | CAGE Code: 87557 |
If you require part number 85100 from Lockheed Corp which is described as a Transformer Pulse component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 85100 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5950008600809 and was produced under the CAGE Code 87557. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 85100 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5950-00-860-0809 Item PartTypeName: TRANSFORMER,PULSE | 5950 | 008600809 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| DL-02-U | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.558 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.398 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 0.402 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| ACZN | PULSE REPETITION RATE | 300.0 HERTZ SINGLE COMPONENT |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AXGY | MOUNTING METHOD | TERMINAL SINGLE GROUP |
| CWJS | WINDING OPERATING VOLTAGE | 15.55 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| TEST | TEST DATA DOCUMENT | 87557-85100 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.398 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 0.402 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| ABMK | OVERALL WIDTH | 0.558 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| ACZH | PRIMARY TO SECONDARY TURN RATIO | 6 TO 1 TO 3 TO 6 SINGLE COMPONENT |
| ADAU | BODY HEIGHT | 0.508 INCHES MINIMUM AND 0.512 INCHES MAXIMUM |
| BPLC | WINDING FUNCTION AND QUANTITY | 1 PRIMARY SINGLE COMPONENT AND 1 SECONDARY SINGLE COMPONENT AND 2 TERTIARY SINGLE COMPONENT |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions