Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 4P94316-103A | Alternate P/N : 4P94316103A | Manufacturer : lockheed martin corporation |
| Item Name: hose assembly nonmetallic | NSN: 4720-00-457-7094 (4720004577094) | CAGE Code: 98897 |
If you require part number 4P94316-103A from Lockheed Martin Corporation which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 4P94316-103A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720004577094 and was produced under the CAGE Code 98897. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 4P94316-103A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-457-7094 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 004577094 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4P94316-103A | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRXX | MEASURING METHOD AND LENGTH | 31.540 INCHES NOMINAL WORKING |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 2ND END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.602 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.140 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| AHNC | CONNECTION STYLE | GASKET SEAL / OPTIONAL END 1ST END |
| AHNC | CONNECTION STYLE | GASKET SEAL / OPTIONAL END 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions