Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : PNAS1993002-01 | Alternate P/N : PNAS199300201 | Manufacturer : lockheed martin corporation |
| Item Name: screw close toleran | NSN: 5305-01-383-5993 (5305013835993) | CAGE Code: 04939 |
| FSC: 5305 Screws |
If you require part number PNAS1993002-01 from Lockheed Martin Corporation which is described as a Screw Close Toleran component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number PNAS1993002-01 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013835993 and was produced under the CAGE Code 04939. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part PNAS1993002-01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-383-5993 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013835993 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PNAS1993002-01 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.338 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.2516 INCHES MINIMUM AND 0.3047 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| AASB | FASTENER LENGTH | 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions