Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : C630-4-16 | Alternate P/N : C630416 | Manufacturer : lockheed martin corporation |
| Item Name: bolt internal wrenching | NSN: 5306-00-959-0990 (5306009590990) | CAGE Code: 81755 |
| FSC: 5306 Bolts |
If you require part number C630-4-16 from Lockheed Martin Corporation which is described as a Bolt Internal Wrenching component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number C630-4-16 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306009590990 and was produced under the CAGE Code 81755. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part C630-4-16 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-959-0990 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 009590990 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VS2796-4-16 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.367 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.438 INCHES MINIMUM AND 1.478 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.369 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.253 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.318 INCHES MINIMUM FIRST HOLE AND 1.378 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES TOP OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions