Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : LS6-6-16-12-6-12 | Alternate P/N : LS661612612 | Manufacturer : lockheed martin corporation |
| Item Name: clamp block | NSN: 5340-01-383-5995 (5340013835995) | CAGE Code: 98897 |
| FSC: 5340 Hardware Commercial |
If you require part number LS6-6-16-12-6-12 from Lockheed Martin Corporation which is described as a Clamp Block component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number LS6-6-16-12-6-12 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340013835995 and was produced under the CAGE Code 98897. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part LS6-6-16-12-6-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-383-5995 Item PartTypeName: CLAMP,BLOCK | 5340 | 013835995 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS6-6-16-12-6-12 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.490 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.210 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| CWWM | CLAMPING HOLE DIAMETER | 0.375 INCHES NOMINAL ALL HOLES |
| MATT | MATERIAL | WOOD |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| CBSM | CABLE DIAMETER FOR WHICH DESIGNED | 0.375 INCHES NOMINAL THIRD HOLE |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.935 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.500 INCHES NOMINAL |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.250 INCHES NOMINAL |
| BYGG | BLOCK HEIGHT | 0.750 INCHES NOMINAL |
| CBSM | CABLE DIAMETER FOR WHICH DESIGNED | 0.750 INCHES NOMINAL SECOND HOLE |
| CWTD | CLAMPING HOLE QUANTITY | 5 |
| CWWM | CLAMPING HOLE DIAMETER | 1.000 INCHES NOMINAL FIRST HOLE |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.437 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | INSERT-.062 SYNTHETIC RUBBER,50-60 SHORE PER AMS3208 MATERIAL IS WOOD,MAPLE NO. 1 SELECT CLEAR ROCK,KILN DRIED THE FIFTH HOLE IS I-SAC 1E AT 0.750 IN. |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MM-L-736 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | VARNISH |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-V-6894 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions