Part No. : J14534-2 | Alternate P/N : J145342 | Manufacturer : lord corp |
Item Name: lever remote control | NSN: 1680-00-237-4672 (1680002374672) | CAGE Code: 76005 |
FSC: 1680 Miscellaneous Aircraft Accessories Components |
If you require part number J14534-2 from Lord Corp which is described as a Lever Remote Control component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number J14534-2 which is listed under the Federal Supply Class 1680 Miscellaneous Aircraft Accessories Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 1680002374672 and was produced under the CAGE Code 76005. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part J14534-2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. J14534-2
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
1680-00-237-4672 Item Description: Lever Remote Control | 1680 | 002374672 | Z | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
J14534-2 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAZR | MAJOR DIAMETER | 0.396 INCHES MINIMUM AND 0.402 INCHES MAXIMUM |
ABMK | OVERALL WIDTH | 1.000 INCHES NOMINAL |
ABSA | SPLINE QUANTITY | 24 |
AGAV | III END ITEM IDENTIFICATION | ENGINE,ACFT,TURBO-PROP |
AGJR | MINOR DIAMETER | 0.365 INCHES MINIMUM AND 0.367 INCHES MAXIMUM |
ASBP | BORE TYPE | SPLINED |
BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
BFGX | SHAFT END THICKNESS | 0.416 INCHES NOMINAL |
BFGY | LINK END THICKNESS | 0.250 INCHES NOMINAL |
BFHA | LINK END HOLE DIAMETER | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | OFFSET HEIGHT: 0.291 IN. NOMINAL |
MATT | III MATERIAL | STEEL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 303, COND A FED SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload