Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ST3M453-9-15 | Alternate P/N : ST3M453915 | Manufacturer : m and m plastics inc |
| Item Name: bolt close tolerance | NSN: 5306-01-374-9232 (5306013749232) | CAGE Code: 58878 |
| FSC: 5306 Bolts |
If you require part number ST3M453-9-15 from M And M Plastics Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ST3M453-9-15 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306013749232 and was produced under the CAGE Code 58878. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ST3M453-9-15 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-374-9232 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 013749232 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MB61-9-15 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| AASU | HEAD HEIGHT | 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.725 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.646 INCHES MINIMUM AND 1.693 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.5610 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.562 INCHES |
| ANEE | GRIP LENGTH | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.877 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions