Part No. : 23-06274 ITEM 26 | Alternate P/N : 2306274ITEM26 | Manufacturer : macgregor usa inc |
Item Name: hose assembly nonmetallic | NSN: 4720-01-426-4987 (4720014264987) | CAGE Code: 1CC45 |
FSC: 4720 Hose and Tubing Flexible |
If you require part number 23-06274 ITEM 26 from Macgregor Usa Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 23-06274 ITEM 26 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720014264987 and was produced under the CAGE Code 1CC45. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 23-06274 ITEM 26 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 23-06274 ITEM 26
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
4720-01-426-4987 Item Description: Hose Assembly Nonmetallic | 4720 | 014264987 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
23-06274 Item 26 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | Thread Class | 3B 1ST END |
CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
CQRB | Seat Angle | 37.0 DEGREES 1ST END |
CRWL | Inside Surface Condition | SMOOTH |
CQGM | Maximum Operating Pressure | 3500.0 POUNDS PER SQUARE INCH |
AAJF | Thread Direction | RIGHT-HAND 2ND END |
CRDW | Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH |
AAJF | Thread Direction | RIGHT-HAND 1ST END |
AAJD | Thread Class | 3A 2ND END |
AKUU | End Connection Design | STRAIGHT 1ST END |
AKUU | End Connection Design | STRAIGHT 2ND END |
THSD | Thread Series Designator | UNJF 2ND END |
CRXX | Measuring Method And Length | 25.000 INCHES NOMINAL OVERALL |
THSD | Thread Series Designator | UNJ 1ST END |
CQBD | Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH |
AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
ABKV | Outside Diameter | 0.870 INCHES NOMINAL |
AWLS | Connection Type | THREADED EXTERNAL BOSS 2ND END |
CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
MRC | Decoded Requirement | Clear Text Reply |
AARX | Inside Diameter | 0.500 INCHES NOMINAL |
AHNC | Connection Style | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
ACKH | Minimum Inside Bending Radius | 7.000 INCHES |
AGAV | End Item Identification | USED ON STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
CQJX | Nominal Thread Size | 0.750 INCHES 2ND END |
CQJX | Nominal Thread Size | 0.875 INCHES 1ST END |
AAGR | Cross-Sectional Shape Style | ROUND |
AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
CMLP | Thread Quantity Per Inch | 14 1ST END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload