Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : CCF-1-2-S-2JZF | Alternate P/N : CCF12S2JZF | Manufacturer : mcgill manufacturing company inc |
| Item Name: cam follower needle bearing | NSN: 3110-01-246-3956 (3110012463956) | CAGE Code: 92563 |
| FSC: 3110 Bearings Antifriction Unmounted |
If you require part number CCF-1-2-S-2JZF from Mcgill Manufacturing Company Inc which is described as a Cam Follower Needle Bearing component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number CCF-1-2-S-2JZF which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110012463956 and was produced under the CAGE Code 92563. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part CCF-1-2-S-2JZF today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-246-3956 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING | 3110 | 012463956 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CCF-1/2-S-2JZF | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.2500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.0000 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGRJ | STUD DIAMETER | 0.1900 INCHES MINIMUM AND 0.1910 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 0.6250 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| FEAT | SPECIAL FEATURES | BRASS PLUG,INSTALLED FLUSH OR 0.0050 IN. BELOW BOTTOM OF SCREW DRIVER SLOT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COPPER ALLOY END PLUG |
| MATT | MATERIAL | PLASTIC POLYAMIDE SEAL |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL COMP E52100 STUD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D789 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| SFTT | SURFACE TREATMENT | OXIDE EXPOSED SURFACES AS MOUNTED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions