Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 12M-14 | Alternate P/N : 12M14 | Manufacturer : metrex valve corp |
| Item Name: setscrew | NSN: 5305-01-470-7722 (5305014707722) | CAGE Code: 21013 |
| FSC: 5305 Screws |
If you require part number 12M-14 from Metrex Valve Corp which is described as a Setscrew component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 12M-14 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014707722 and was produced under the CAGE Code 21013. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 12M-14 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-470-7722 Item PartTypeName: SETSCREW | 5305 | 014707722 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| EAOCD-822NF-3WITEM18 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.200 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.250 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT FILLISTER |
| AASL | HEAD DIAMETER | 0.260 INCHES MINIMUM AND 0.261 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.370 INCHES NOMINAL |
| ABQJ | POINT STYLE | POINTLESS |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AGAV | END ITEM IDENTIFICATION | HARDWARE, SUB ENGINEERING AND DIESEL SYSTEM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STOP |
| FEAT | SPECIAL FEATURES | THREADS PER MIL-S-7742;BREAK SHARP EDGES .005 TO .010;FINISH PER MIL STD-10 |
| MATT | MATERIAL | NICKEL ALLOY OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions