Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MIL-H-13531 | Alternate P/N : MILH13531 | Manufacturer : military specifications |
| Item Name: hose assembly nonmetallic | NSN: 4720-01-200-0815 (4720012000815) | CAGE Code: 81349 |
| FSC: 4720 Hose and Tubing Flexible |
If you require part number MIL-H-13531 from Military Specifications which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MIL-H-13531 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720012000815 and was produced under the CAGE Code 81349. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MIL-H-13531 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-200-0815 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 012000815 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SAE-J517 | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.843 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 22.000 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION-OVERALL SPRING GUARD,FLAT STEEL COIL,INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC CAP ENDS PER MIL-C-5501 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPT 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE OR 3 TYPE AND A CLASS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions