Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MIL-DTL-25579 | Alternate P/N : MILDTL25579 | Manufacturer : military specifications |
| Item Name: hose assembly nonme | NSN: 4720-00-001-0053 (4720000010053) | CAGE Code: 81349 |
If you require part number MIL-DTL-25579 from Military Specifications which is described as a Hose Assembly Nonme component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MIL-DTL-25579 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720000010053 and was produced under the CAGE Code 81349. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MIL-DTL-25579 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-001-0053 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 000010053 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS8005F567E115 | 2 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.406 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 115.0 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 56.875 INCHES NOMINAL WORKING |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS8005 GOVERNMENT STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions