Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MS16555-21 | Alternate P/N : MS1655521 | Manufacturer : military standards corp |
| Item Name: pin straight headless | NSN: 5315-00-836-1421 (5315008361421) | CAGE Code: 96906 |
If you require part number MS16555-21 from Military Standards Corp which is described as a Pin Straight Headless component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS16555-21 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315008361421 and was produced under the CAGE Code 96906. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS16555-21 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-836-1421 Item PartTypeName: PIN,STRAIGHT,HEADLESS | 5315 | 008361421 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NASM16555-21 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
| AAHP | SECOND END STYLE | CHAMFERED |
| ACHT | PIN OVERALL LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ACHU | PIN OVERALL DIAMETER | 0.0626 INCHES MINIMUM AND 0.0628 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.008 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| AMFM | SECOND END TAPER LENGTH | 0.091 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | CASEHARDENED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 64.0 ROCKWELL C MAXIMUM OVERALL |
| CRMG | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
| CTHC | SECOND END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.062 IN. MIN 0.063 IN. MAX RADIUS IN LIEU OF CHAMFER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions