Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MS21342-113 | Alternate P/N : MS21342113 | Manufacturer : military standards corp |
| Item Name: setscrew | NSN: 5305-01-210-8377 (5305012108377) | CAGE Code: 96906 |
If you require part number MS21342-113 from Military Standards Corp which is described as a Setscrew component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS21342-113 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012108377 and was produced under the CAGE Code 96906. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS21342-113 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-210-8377 Item PartTypeName: SETSCREW | 5305 | 012108377 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21342-113 | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEADLESS SETSCREW) |
| AAUH | SPLINE MINOR DIAMETER | 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.061 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AAUK | SPLINE WIDTH | 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |
| ABQJ | POINT STYLE | CUP |
| ABQZ | INTERNAL DRIVE STYLE | SIX SPLINE |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM OVERALL AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions