Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ECC-3M 333D296-1 | Alternate P/N : ECC3M333D2961 | Manufacturer : minnesota mining and mfg co |
| Item Name: insulation sleeving electrical s | NSN: 5970-01-190-2542 (5970011902542) | CAGE Code: 75037 |
| FSC: 5970 Electrical Insulators and Insulating Materials |
If you require part number ECC-3M 333D296-1 from Minnesota Mining And Mfg Co which is described as a Insulation Sleeving Electrical S component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ECC-3M 333D296-1 which is listed under the Federal Supply Class 5970 Electrical Insulators and Insulating Materials. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5970011902542 and was produced under the CAGE Code 75037. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ECC-3M 333D296-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5970-01-190-2542 Item PartTypeName: INSULATION SLEEVING,ELECTRICAL,S | 5970 | 011902542 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 22D185-3-0 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJH | TEMP RATING | -55.0 DEG CELSIUS |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | 0.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | 0.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZR | DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 3.840 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZS | DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 1.640 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | 0.800 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | 2.600 INCHES MINIMUM AS SUPPLIED |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | 1.750 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | 2.600 INCHES MINIMUM AS SUPPLIED |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 1.580 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| CQBC | MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | LARGE END HAS LIP |
| FLEX | FLEXIBILITY | SEMIRIGID |
| HGTH | HEIGHT | 2.600 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | PLASTIC POLYOLEFIN OR PLASTIC CROSS-LINKED POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RT-301,RAYCHEM CORP MFR REF 1ST MATERIAL RESPONSE OR MIL-I-81765/1,TYPE I MIL SPEC 2ND MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | BOOT-90 DEGREES |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions