Part No. : 30044 | Manufacturer : mitsubishi caterpillar | Item Name: setscrew |
NSN: 5305-00-217-9173 (5305002179173) | CAGE Code: 78640 | FSC: 5305 Screws |
If you require part number 30044 from Mitsubishi Caterpillar which is described as a Setscrew component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 30044 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305002179173 and was produced under the CAGE Code 78640. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 30044 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 30044
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-217-9173 Item Description: Setscrew | 5305 | 002179173 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
30044 | 1 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.396 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.784 INCHES MINIMUM AND 0.808 INCHES MAXIMUM |
AASK | HEAD STYLE | CROWNED HEXAGON |
AASU | HEAD HEIGHT | 0.180 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 0.615 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
AAUY | POINT LENGTH | 0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
AAVA | POINT DIAMETER | 0.238 INCHES MINIMUM AND 0.242 INCHES MAXIMUM |
ABQJ | POINT STYLE | FLAT |
ABQZ | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
CFSG | NONSTANDARD THREAD PITCH DIAMETER | +0.3470 TO 0.3500 INCHES |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES MINIMUM |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload