Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : D230 | Manufacturer : mkt geotechnical systems | Item Name: hose assembly nonmetallic |
| NSN: 4720-00-236-2656 (4720002362656) | CAGE Code: 20263 | FSC: 4720 Hose and Tubing Flexible |
If you require part number D230 from Mkt Geotechnical Systems which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number D230 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720002362656 and was produced under the CAGE Code 20263. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part D230 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.516 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 27 1ST END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.125 INCHES 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 301.750 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | REUSABLE FITTINGS |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPT 1ST END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions