Part No. : 5330D | Manufacturer : mmi amd | Item Name: microcircuit digital |
NSN: 5962-01-011-4276 (5962010114276) | CAGE Code: 50364 | FSC: 5962 Microcircuits Electronic |
If you require part number 5330D from Mmi Amd which is described as a Microcircuit Digital component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 5330D which is listed under the Federal Supply Class 5962 Microcircuits Electronic. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5962010114276 and was produced under the CAGE Code 50364. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 5330D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 5330D
MRC | Criteria | Characteristic |
---|---|---|
ADAQ | BODY LENGTH | 0.750 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND W/ENABLE AND PROGRAMMABLE AND PROGRAMMED AND BIPOLAR AND W/BUFFERED OUTPUT AND W/DECODED OUTPUT AND EXPANDABLE AND WIRE-OR OUTPUTS |
CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
CQZP | INPUT CIRCUIT PATTERN | 6 INPUT |
CZEQ | TIME RATING PER CHACTERISTIC | 50.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
TEST | TEST DATA DOCUMENT | 94990-51-+01424E DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload