WF312-13 by Monogram Aerospace Fasteners Inc With NSN 5320-00-782-7569

Part No. : WF312-13	Alternate P/N : WF31213	Manufacturer : monogram aerospace fasteners inc
Item Name: rivet blind	NSN: 5320-00-782-7569 (5320007827569)	CAGE Code: 98524
FSC: 5320 Rivets

If you require part number WF312-13 from Monogram Aerospace Fasteners Inc which is described as a Rivet Blind component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number WF312-13 which is listed under the Federal Supply Class 5320 Rivets. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5320007827569 and was produced under the CAGE Code 98524. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part WF312-13 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for WF312-13

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number WF312-13 with NSN 5320-00-782-7569, 5320-00-782-7569

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-00-782-7569 Item PartTypeName: RIVET,BLIND	5320	007827569	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
WF312-13	2	2	5

Characteristics Data of NSN 5320-00-782-7569, 5320007827569

MRC	Criteria	Characteristic
AASK	HEAD STYLE	FLUSH FLAT) COUNTERSUNK INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER)
AAZE	SHANK DIAMETER	0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
AAZF	SHANK STYLE	THREADED SELF-PLUGGING SHANK W/SLEEVE
ABAF	EXPANSION DEVICE	SERRATED STEM-TYPE W
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATT	MATERIAL	STEEL COMP 8740 STEM
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM
SFTT	SURFACE TREATMENT	CADMIUM BOLT AND CHROMATE BOLT
AASB	FASTENER LENGTH	0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM
AAZG	HEAD MAJOR DIAMETER	0.626 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
ABAJ	LUBRICATION	GREASE FILM
ANEE	GRIP LENGTH	0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
CQFM	HARDNESS RATING	39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT
CQFM	HARDNESS RATING	39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT
CQSX	SHEAR STRENGTH	146000 DOUBLE POUNDS PER SQUARE INCH
HEAT	HEAT TREATMENT	ANNEALED OVERALL
MATT	MATERIAL	STEEL COMP 304 SLEEVE
MATT	MATERIAL	STEEL COMP 8740 BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE
SFTT	SURFACE TREATMENT	CADMIUM NUT AND CHROMATE NUT
SFTT	SURFACE TREATMENT	CADMIUM SLEEVE AND PASSIVATE SLEEVE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL2 FED SPEC SINGLE TREATMENT RESPONSE NUT

Related NSN Componets for WF312-13

Part WF312-13 With Different Manufacturers

WF312-13

RFQ

If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.

Upload

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer