Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : PL375-6 | Alternate P/N : PL3756 | Manufacturer : monogram aerospace fasteners inc |
| Item Name: rivet blind | NSN: 5320-00-812-5372 (5320008125372) | CAGE Code: 98524 |
If you require part number PL375-6 from Monogram Aerospace Fasteners Inc which is described as a Rivet Blind component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number PL375-6 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5320008125372 and was produced under the CAGE Code 98524. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part PL375-6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-812-5372 Item PartTypeName: RIVET,BLIND | 5320 | 008125372 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BE12A6H | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.589 INCHES MINIMUM AND 0.619 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| ANEE | GRIP LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.491 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP 304 SLEEVE OR STEEL COMP 303F SLEEVE OR STEEL COMP 303 SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT |
| SFTT | SURFACE TREATMENT | CADMIUM SLEEVE AND PASSIVATE SLEEVE |
| AASU | HEAD HEIGHT | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAZF | SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ABAJ | LUBRICATION | DRY FILM OR WAX |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| CQSX | SHEAR STRENGTH | 19500 DOUBLE POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | HEAT PROCESS MIL-H-6875 |
| MATT | MATERIAL | STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT OR STEEL COMP 4130 BOLT |
| MATT | MATERIAL | STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT OR STEEL COMP 4130 NUT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| SFTT | SURFACE TREATMENT | CADMIUM BOLT AND CHROMATE BOLT |
| SFTT | SURFACE TREATMENT | CADMIUM NUT AND CHROMATE NUT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions