Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HTC-8-ST-1 | Alternate P/N : HTC8ST1 | Manufacturer : moog inc |
| Item Name: synchro control transformer | NSN: 5990-00-160-1072 (5990001601072) | CAGE Code: 99932 |
| FSC: 5990 Synchros and Resolvers |
If you require part number HTC-8-ST-1 from Moog Inc which is described as a Synchro Control Transformer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HTC-8-ST-1 which is listed under the Federal Supply Class 5990 Synchros and Resolvers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5990001601072 and was produced under the CAGE Code 99932. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HTC-8-ST-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-160-1072 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 001601072 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CTH8STIL584 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.7460 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4570 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 87.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 210.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 28.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 250.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 143.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 24.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0480 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 690.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 114.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 73.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 2.303 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions