Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HTC-8-ST-2 | Alternate P/N : HTC8ST2 | Manufacturer : moog inc |
| Item Name: synchro control transformer | NSN: 5990-00-891-4085 (5990008914085) | CAGE Code: 99932 |
| FSC: 5990 Synchros and Resolvers |
If you require part number HTC-8-ST-2 from Moog Inc which is described as a Synchro Control Transformer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HTC-8-ST-2 which is listed under the Federal Supply Class 5990 Synchros and Resolvers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5990008914085 and was produced under the CAGE Code 99932. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HTC-8-ST-2 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-891-4085 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008914085 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM41004065 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND A |
| ABHP | OVERALL LENGTH | 1.8150 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0670 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4670 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | 6610-00-931-3658 |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 87.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 260.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 28.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 OUTPUT TO INPUT NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| AJWH | SHAFT END PLAY | 0.0015 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3000 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 690.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 114.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 73.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAVL | PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AJSW | ZRO RESISTANCE IN OHMS | 210.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 250.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 143.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 30.00 MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWQ | PILOT LENGTH | 0.0480 INCHES MAXIMUM |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions