Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TGH-11-H-7 | Alternate P/N : TGH11H7 | Manufacturer : moog inc |
| Item Name: synchro transmitter | NSN: 5990-01-310-5421 (5990013105421) | CAGE Code: 99932 |
| FSC: 5990 Synchros and Resolvers |
If you require part number TGH-11-H-7 from Moog Inc which is described as a Synchro Transmitter component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TGH-11-H-7 which is listed under the Federal Supply Class 5990 Synchros and Resolvers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5990013105421 and was produced under the CAGE Code 99932. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TGH-11-H-7 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-310-5421 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 013105421 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5160113-1 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1150 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4850 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 54.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 900.0 MILLIWATTS MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 392.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 11.30 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 556.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 230.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.70 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.300 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 4400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2430.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 50.30 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 210.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.158 STATOR TO ROTOR NOMINAL |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOM. |
| TEST | TEST DATA DOCUMENT | 55973-5160113 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions