Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ETH10AS1 | Manufacturer : moog inc | Item Name: synchro control transformer |
| NSN: 5990-00-856-9203 (5990008569203) | CAGE Code: 99932 |
If you require part number ETH10AS1 from Moog Inc which is described as a Synchro Control Transformer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ETH10AS1 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5990008569203 and was produced under the CAGE Code 99932. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ETH10AS1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-856-9203 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008569203 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ETH10AS1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABHP | OVERALL LENGTH | 1.7860 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9370 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 10 |
| AJSP | STATOR INPUT CURRENT RATING | 80.0 MILLIAMPERES NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 195.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 760.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 80.00 NOMINAL |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TURRET |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 190.0 MILLIWATTS NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 29.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 240.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 140.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 25.00 NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 124.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions