Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : SC-22 | Alternate P/N : SC22 | Manufacturer : morse industrial corp |
| Item Name: bearing unit ball | NSN: 3130-01-022-0533 (3130010220533) | CAGE Code: 02695 |
If you require part number SC-22 from Morse Industrial Corp which is described as a Bearing Unit Ball component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SC-22 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130010220533 and was produced under the CAGE Code 02695. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SC-22 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-022-0533 Item PartTypeName: BEARING UNIT,BALL | 3130 | 010220533 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SC-22 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 1.3750 INCHES NOMINAL |
| AFWB | HOUSING DIAMETER | 3.8740 INCHES MINIMUM AND 3.8760 INCHES MAXIMUM |
| AFWD | HOUSING LENGTH | 1.2188 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.6875 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| FEAT | SPECIAL FEATURES | LUBE FITTING ACCESS ON FACE AND/OR OD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | WOOL SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL CARTRIDGE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions