Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS335CP27 | Manufacturer : national aerospace standards com | Item Name: screw close tolerance |
| NSN: 5305-00-866-3096 (5305008663096) | CAGE Code: 80205 | FSC: 5305 Screws |
If you require part number NAS335CP27 from National Aerospace Standards Com which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS335CP27 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305008663096 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS335CP27 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-866-3096 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 008663096 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS335CP27 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.432 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE |
| AAWU | SINGLE SHEAR STRENGTH | 7300 POUNDS PER SQUARE INCH |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.797 INCHES NOMINAL FIRST HOLE |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4037 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 5TH MATE |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS335 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASB | FASTENER LENGTH | 2.953 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions