Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS336CA26 | Manufacturer : national aerospace standards com | Item Name: screw close tolerance |
| NSN: 5305-01-310-5825 (5305013105825) | CAGE Code: 80205 | FSC: 5305 Screws |
If you require part number NAS336CA26 from National Aerospace Standards Com which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS336CA26 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013105825 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS336CA26 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-310-5825 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013105825 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS336CA26 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.641 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.813 INCHES MINIMUM AND 2.860 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 2.188 INCHES NOMINAL |
| ASDB | WIDTH ACROSS FLATS | 0.2197 INCHES MINIMUM AND 0.2217 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions