Part No. : MS35307-303 | Alternate P/N : MS35307303 | Manufacturer : national aerospace standards |
Item Name: screw cap hexagon head | NSN: 5305-00-719-3997 (5305007193997) | CAGE Code: 80205 |
FSC: 5305 Screws |
If you require part number MS35307-303 from National Aerospace Standards which is described as a Screw Cap Hexagon Head component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS35307-303 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007193997 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS35307-303 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS35307-303
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-719-3997 Item Description: Screw Cap Hexagon Head | 5305 | 007193997 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms35307-303 | 1 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
AASK | HEAD STYLE | HEXAGON |
AASU | HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
AGAV | END ITEM IDENTIFICATION | MRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); MRAP - M-ATV |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CMLP | THREAD QUANTITY PER INCH | 20 |
CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 80.0 ROCKWELL C NOMINAL OVERALL |
CQHQ | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
MATT | MATERIAL | STEEL COMP 316 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNC |
AATB | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload