Part No. : MS35751-59 | Alternate P/N : MS3575159 | Manufacturer : national aerospace standards |
Item Name: bolt square neck | NSN: 5306-00-855-0436 (5306008550436) | CAGE Code: 80205 |
FSC: 5306 Bolts |
If you require part number MS35751-59 from National Aerospace Standards which is described as a Bolt Square Neck component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS35751-59 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306008550436 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS35751-59 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS35751-59
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-00-855-0436 Item Description: Bolt Square Neck | 5306 | 008550436 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms35751-59 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 1.125 INCHES MINIMUM |
AASB | FASTENER LENGTH | 6.969 INCHES MINIMUM AND 7.062 INCHES MAXIMUM |
AASK | HEAD STYLE | BUTTON |
AASL | HEAD DIAMETER | 0.688 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.156 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
AGQB | NECK LENGTH | 0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
CMLP | THREAD QUANTITY PER INCH | 18 |
CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 95.0 ROCKWELL B MAXIMUM OVERALL |
MATT | MATERIAL | STEEL OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
CWXQ | NECK WIDTH | 0.307 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload