Part No. : MS21044C6 | Manufacturer : national aerospace standards | Item Name: nut self locking hexagon |
NSN: 5310-00-857-4959 (5310008574959) | CAGE Code: 80205 | FSC: 5310 Nuts and Washers |
If you require part number MS21044C6 from National Aerospace Standards which is described as a Nut Self Locking Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS21044C6 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310008574959 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS21044C6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS21044C6
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-857-4959 Item Description: Nut Self Locking Hexagon | 5310 | 008574959 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms21044c6 | 1 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
ACTA | NUT STYLE | HEXAGON |
ADEA | NUT HEIGHT | 0.318 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
ASDB | WIDTH ACROSS FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
AZKQ | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
BZRR | THREAD SERIES | UNJF |
CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES NOMINAL NUT |
CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
FEAT | SPECIAL FEATURES | . |
MATT | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 NUT |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL EXCEPT INSERT |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
AGAV | III END ITEM IDENTIFICATION | RG-33 AUV MRAP; MRAP BUFFALO MK2A2 |
CMLP | THREAD QUANTITY PER INCH | 24 |
CSXL | III BEARING SURFACE FINISH | 125.0 MICROINCHES |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5688 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5630 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5647 ASSN STD 3RD MATERIAL RESPONSE NUT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload