Part No. : MS14155-7 | Alternate P/N : MS141557 | Manufacturer : national aerospace standards |
Item Name: washer recessed | NSN: 5310-01-066-1695 (5310010661695) | CAGE Code: 80205 |
FSC: 5310 Nuts and Washers |
If you require part number MS14155-7 from National Aerospace Standards which is described as a Washer Recessed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS14155-7 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310010661695 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS14155-7 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS14155-7
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-01-066-1695 Item Description: Washer Recessed | 5310 | 010661695 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms14155-7 | 2 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.439 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
ABKV | OUTSIDE DIAMETER | 0.868 INCHES MINIMUM AND 0.878 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.144 INCHES MINIMUM AND 0.158 INCHES MAXIMUM |
CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
CQJW | TOP RECESS DIAMETER | 0.556 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
CSML | BOTTOM RECESS DIAMETER | 0.556 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
MATT | MATERIAL | STEEL COMP 4130 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload