Part No. : MS24694S83 | Manufacturer : national aerospace standards | Item Name: screw machine |
NSN: 5305-00-707-3619 (5305007073619) | CAGE Code: 80205 |
If you require part number MS24694S83 from National Aerospace Standards which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS24694S83 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007073619 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS24694S83 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. MS24694S83
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-707-3619 Item Description: Screw Machine | 5305 | 007073619 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ms24694s83 | 1 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.407 INCHES MINIMUM |
AASB | FASTENER LENGTH | 2.578 INCHES MINIMUM AND 2.625 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL COMP 8740 OR STEEL COMP 8630 |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE |
CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | --P-416,TY 2,CL 3 FED SPEC 13TH TREATMENT RESPONSE |
THSD | THREAD SERIES DESIGNATOR | UNF |
AASL | HEAD DIAMETER | 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload